Welcome to the Mirage Machines Portable Performance Blog

Metal Machining Insight: Avoiding built up edge


What is built up edge?

Built up edge (BUE),  is a problem you can face when machining ‘sticky’ metals such as low carbon steel, stainless steel and aluminium. BUE is material from the work piece that builds up against the rake face of the cutting tool. When this happens the outcome is likely to be a poor surface finish. This is bad news for all machinists - especially for those working in the oil & gas and power generation industries. The last thing you need when you're machining a flange or line boring a turbine casing is to mess up and have to to start all over again.

Understanding how built up edge is formed will help you prevent this from happening. Take a look at the information we've gathered from a variety of sources.

How does built up edge happen?

  • The built up of material changes the geometry of the cutting tool. Including the rake angle. This change in geometry is ever changing. So you lose dimensional control of the metal removal process.
  • The material in a built up edge is work-hardened and abrasive. When pieces break away from the cutting tool they stick to the workpiece, causing damage to the surface.
  • The larger the BUE, the rougher the resulting surface.
  • Work hardened particles passing under the flank face can lead to flank wear.
  • With a built up edge, the cut tends to be deeper than it would be with just the normal tip of the cutting tool.
  • Each time a piece breaks off it can remove some of the cutting tool. This leads to premature tool wear.

The video below posted on YouTube (posted by Iscar) does a fantastic job showing you chip formation as it happens. 

Mirage is not connected in any way with adverts that may appear during this video.

How to avoid built up edge

This will depend upon the material you are cutting. A quick search on Google will show you some suggestions, including what we found below;

  • When using carbide inserts, increase the cutting speed – if machining at high speed, the time available for adhering microchips will be less, and formation of a built up edge will be minimized. 
  • When using HSS cutting tools the opposite of the above can be true. A lower speed results in less heat - which means less material build up.
  • Decrease the feed – pressure welding will be avoided if you use a shallower cut
  • Reduce friction - Use the correct cutting lubricant if you wish to use low cutting speeds. The heat generated during machining will be carried away by the cutting fluid. Less heat means less build up.
  • Increase the rake angle

If you need help choosing the right portable machine tool for your project  click here to get in touch with your regional Mirage technical sales representative.





Download The Complete Guide to Managing Flanges


Recent Posts